SNEAKER THRONE Shoe Display Case Worth It?

SNEAKER THRONE Shoe Display Case Worth It?


so I just got this package in and boy
I’m telling you right now I’ve been waiting for this for a while if you
haven’t seen already this is the sneaker display case also known as the sneaker
throne and bruh I’ve been waiting to check these things out because I’ve been
seeing them online oh so much and I think it’s time to see what they really
talking about so let’s go ahead and open these things up put them together and
really put them to the test welcome back to the channel what’s up
with you guys how you doing how you been if you did not know by now my name is DJ
and this is the DNA show if you haven’t already go ahead and hit that subscribe
button smash the like button cuz that helps to algorithm oh so much and man
how you doing drop a comment down below in the comment section because I know a
lot of people stuck at the house and trust me I’ve been at the crib for the
past week and I got all my food and all my snacks ready to go so I’m ready to
just start making videos because that’s basically all I can do right now so drop
comments let me know how your week is gone and what you plan on doing please
continue to wash your hands even though you at the house by yourself don’t be
nasty breath come on man wash your hands don’t forget to wash your blood everyday
too alright so let’s go ahead and start this
video let’s put this thing together and put it to test so this pack comes with three different
packages let’s start with the first one this one has all the essentials that
you’ll need the screws nuts bolts everything like that
second pack is defeat third pack is the lighting system that is the LED lights
the coil the battery pack and the remote let’s go ahead and start putting this
thing together so first that we’re gonna screw into the screw holes on the outer
parts of each one of these ends right here there’s six holes that you need to
put in on each side so that’s 12 screws total once you complete that you want to
take these little wood pegs right here and stick them into the holes that are
right next to them they don’t have any threads or anything they’ll slide right
in very easily then you want to grab the three long panels and look at the
labeling one of them says top one of them says middle one of them says bottom
you’re gonna stick the top one on first then you’re gonna stick these small
black screws that rotate to lock it in through them tight the arrow point down
or upward whatever way you consider it from there that’ll lock it in continue
that same process on the second and third shelf as well next thing we’re
gonna do is take the Plexiglas peel off the paper that’s on one side and the
other film on the other and then you’ll take the extending in and stick that
inside the hole right here just so you can see how it fits like that and the
next one you’ll do the same exact thing peel off the paper and do the same exact
process for the bottom shelf as well so now that we know where the Plexiglas
doors go we want to remove those out the way again and then put this side piece
on we’re gonna lock this into the middle part first and then fit them into the
holes here on the outsides and once that sits down you’ll be able to lock that in
later but now we need to take the Plexiglas door and put it back on before
we lock it down but if not we won’t be able to fit the door and later once we
lock the side piece down don’t forget to put this tip in there in the hole it
will insert right inside that hole there’s a groove inside the wood and
then up see Brett you got it this get help if you can get help all right we
good now you’re gonna put those black screws in there like we did before at
the bottom and then I will lock the doors in as you can see right here they
can open and close now so what you’re gonna want to do is close them and then
put it face down onto the carpet so that way we can put the back panels on and
then we’ll be almost done and ready for lighting so looking at the back
panels here you can see that they have a bunch of screw holes and they have a
pack of small screws so we’re gonna stick these small screws in each and
every one of these holes like the back panels on you want to make sure that
it’s touching in the middle so that way there’s no seam line between it and no
light meets group okay so we are now officially back in the stew and it is
time to put the lights in so as you have seen that was the process of putting the
thing together but now we got to put the lights in so I’m gonna show you guys the
couple things that it does come with these are the battery packs right here
to separate one for each level one two and then what’s gonna happen is these
are gonna connect to this strip of lights so we’re gonna take the stripper
lace right here and undo it real quick and as you can see there’s two sets of
lights on here so it’s not gonna be one long thing going through there you’re
gonna have two separate ones they’re gonna go through here take my reach the
length of the container so inside I’m gonna put it on the top back part of it
and it’s gonna shine downward and that way the light will illuminate throughout
and it was shined down and you won’t be able to see it from a distance so the
first thing that we’re gonna want to do is open up the battery packet here
you’re gonna have to provide your own batteries it doesn’t come with batteries
you use this double-a batteries so we’re gonna put three double A batteries in
right here negative to negative positive to positive like normal like
you always live on anything when you’re installing batteries you’re gonna pop
this back on the top right here what we’re gonna do is stick the end of the
lights one the end of the lights there’s three four prongs right here we’re gonna
take these four prongs and match it up to the holes right here and just plug it
in very very simple very easy and then we want to test it and make sure that it
works see right here okay so I got the lights working and that’s just the on
switch and off switch for these so we’re gonna leave them on and then we’re gonna
use the remote to turn them off if that works
gotta pull the plastic out of the reboil guys there we go okay try this again
there we go so the lights are off now so what we’re gonna do now is open up the
first level right here and slide this back so once we get this open the
strategy is going to be to stick the lights here in the back very far as we
can and then we want to have them shining downward instead of outward
because if you’re looking at it from far away you don’t want the lights to be
beating through so you always want the light to shine down at least that’s how
I feel I’ve seen people do it other ways that was what I’ve seen on Instagram
I’ve never done it before so this is my first time but I’m assuming that’s the
best method if you think it’s better the other way let me know because I think it
gives it a cleaner look so let’s go ahead and try that way and see once we
get this 3m off so we’re gonna pull off the 3m there’s a red lining right here
it’s really really sticky if I can get this thing up sheesh okay here we go so
now as you can see we’re gonna pull off that we have that sticky and then we’re
gonna also add another pad to the battery right here I’m gonna take
another pad and I’m gonna add it to the backside of the battery pack so that way
it can stick inside of there as well stick that to there we’re gonna peel off
the 3m on here as well okay so now we got it so what I’m gonna do is I’m gonna
stick this in here I’m gonna stick the battery pack in the corner up here on
the right corner and then I’m a pressed to it make sure that it sticks and then
from here we’re gonna stick the lights up top and we’re gonna run these along
the back line of the shelving unit and then we’re gonna
stick that through and push it on and then let’s test it first just to make
sure that it’s all working okay it’s working so let’s get the second one in
and then uh we’ll stick some shoes in there and see what this is really about
see if this really looks dope or not honestly it’s coming together pretty
good I’m liking it and I think it’s gonna be a nice addition to the
collection especially putting some heaters up in there making a look dope
look at I see for Instagram and stuff like that so I’m pretty excited if you
ask me okay so now that this one’s ready to go we’re gonna do the same thing
stick it in the back corner right here make sure it’s stuck add a little
pressure to it and then we’re gonna stick the line again in the back facing
down let’s get some shoes in here and let’s see what this thing is talking about so after seeing all that let me know
what you guys think down below in the comment section is this something that
you think will fit well into your room me personally I think it will be a great
display a great addition to the room so I’m loving it shout out to sneaker
throwing for sending these to me again if you guys are interested in these
Thrones don’t forget to check out the link down below in the description use
the discount code DNA show and I will get you an additional 10% off of your
order if you order I think over three things that will also get you free
shipping and different things like that so go ahead and check out the website
let me know what you guys think down below in the comment section if you guys
plan on ordering any hey shoot me a DM and let me know that you ordered one I
want to see pictures of your wall as well once you get yours in place and put
together so with that being said I hope you guys enjoyed this man again like I
said before don’t forget to wash your hands don’t forget to wash your butt and
I’ma see y’all in the next one my name is DJ I’m signing out I’ll go peace you

32 thoughts on “SNEAKER THRONE Shoe Display Case Worth It?”

Leave a Reply

Your email address will not be published. Required fields are marked *